Need help?Do you have a question about the Vita Spa 100 Series and is the answer not in the manual?
Explains the expected behavior of the spa's GFCI and initial tripping.
Details the causes, symptoms, and effects of excessive body heat exposure in a spa.
Specific electrical requirements for spas installed in European countries, including RCD standards.
Guidance on choosing a suitable and level location for spa installation.
Considerations for installing a spa in an outdoor environment.
Considerations for installing a spa in an indoor environment, including humidity management.
Describes different types of spa jets and their functions for hydro-massage.
Instructions on how to clean and maintain spa jets to ensure optimal performance.
Detailed steps for removing, cleaning, and reinstalling spa jet inserts.
Explains how air controls adjust jet action and their impact on spa operation.
Crucial safety guidelines for all electrical connections and installations for the spa.
Specific electrical requirements and considerations for spa installations in Europe.
Explanation of Ground-Fault Circuit Interrupters and their necessity for spa safety.
Details the function and requirements of RCDs for spa electrical safety.
Information on determining spa amperage requirements and electrical connection options.
Guidance on spa power cord connections, including GFCI/RCD integration.
Specifies electrical requirements for 240V spa installations, including wiring and phase.
Specifies electrical requirements for 120V spa installations, including wiring and phase.
Details models convertible from 240V to 120V and their service requirements.
Instructions on how to bleed air from the system after filling or refilling the spa.
Steps for filling the spa with water, ensuring proper preparation.
Describes the spa's priming mode, its duration, and purpose.
Detailed steps for priming spa pumps to ensure proper water flow.
How to manually exit the priming mode and what to expect on the display.
Explains the operation of circulation pumps, including continuous and intermittent modes.
Details how filtration cycles and ozone generation work together for water quality.
Describes the spa's automatic freeze protection mechanisms.
Information on running optional clean-up cycles for maintaining water quality.
Instructions for changing the desired water temperature and navigating temperature settings.
How to use the press-and-hold function for continuous temperature adjustment.
Explanation of using separate high and low temperature ranges for different needs.
Describes the continuous operation of the circulation pump when the spa is set to 24HR circulation.
Explains the hybrid Ready/Rest mode and when it activates.
Steps to switch the spa's operating mode between Ready and Rest.
Instructions for setting the spa's internal clock for proper function.
Specific steps to lock only the temperature settings on the control panel.
Steps to lock the entire control panel, disabling most functions.
Details on setting the primary spa filtration cycle, including start time and duration.
Instructions for setting up a secondary, optional filter cycle for the spa.
Explains the purpose and activation of purge cycles for maintaining plumbing cleanliness.
Guidance on navigating the menu structure using the control panel buttons.
Details on the spa's automatic time-out feature for pumps and lights for safety and efficiency.
Explanation of common error messages displayed on the spa's LCD screen and their solutions.
Crucial information on maintaining proper water balance for spa health and equipment longevity.
Methods and importance of sanitizing spa water using chlorine, bromine, or ozone.
Guidance on maintaining the correct pH balance for water quality and equipment protection.
Specific recommended levels for pH, sanitizer residual, and other water chemistry parameters.
Details on using ozone as a sanitizing agent for spa water and its benefits.
Information on using specialty chemicals alongside ozone for optimal water maintenance.
To Next Page
General
