vita Country Corner Picket - User Manual

1. Corner Post (1) 3” x 3” x 43” - (8 cm x 8 cm x 109 cm) - White 10785, Brown 14094
2. Top Rails (2) 1 1/2” x 1 1/2” x 44.73” - (4 cm x 4 cm x 114 cm) - White 10787, Brown 14095
3. End Post (2) 3” x 3” x 38” - (8 cm x 8 cm x 97 cm) - White 10786, Brown 14096
4. 18” Pickets (6) 7/8” x 3” x 18” - (2 cm x 8 cm x 46 cm) - White 10132, Brown 14097
5. 19” Pickets (2) 7/8” x 3” x 19” - (2 cm x 8 cm x 48 cm) - White 10133, Brown 14098
6. Bottom Rails (2) 1 1/2” x 1 1/2” x 44.73” (8 cm x 8 cm x 114 cm) - White 10788, Brown 14099
7. 20 1/2” Pickets (2) 7/8” x 3” x 20 1/2” - (2 cm x 8 cm x 52 cm) -White 10134, Brown 14100
8. 23” Pickets (2) 7/8” x 3” x 23” - (2 cm x 8 cm x 58 cm) - White 10135, Brown 14101
Optional Materials
3 Bags of pre-mix concrete for extra post stability.
Tools You Will Need
• Shovel
• Tape measure
General Information
Read Instructions through carefully before
beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 10 ft. x 8 ft. (3 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling components.
Please read through before starting assembly.
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Check Box for These Contents
In the event of damaged, missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to F ri. 8:00 AM to 5:00 PM EST).
ASSEMBLY INSTRUCTIONS
Country Corner Picket
White Vinyl - VA20234
Brown Composite Vinyl -VA84050
1
43.7 in
110.9 cm
Ver 2.4/071020
7
5
4
3
1
2
8
6
38.7 in
98.2 cm
42.5 in
108.0 cm
48.9 in
124.1 cm
www.wearevita.com

Summary

Check Box for Contents

Optional Materials and Tools

General Information

Assemble the Post and Frame

Attach Rails to Corner Post

Insert top and bottom rails into the corner post ensuring proper orientation for assembly.

Connect End Posts to Frame

Attach end posts to remaining rail ends, pushing past locking tabs to create the frame.

Install Frame in Ground

Dig holes and position frame, checking for level before securing with cement if desired.

Assemble the Pickets

Install Longest Pickets

Slip the 23" pickets down through the top rail into the bottom rail on each side.

Install Remaining Pickets

Insert remaining pickets in descending order of length into the frame's holes.

Overview

1. Function Description
2. Important Technical Specifications
3. Overall Dimensions (Assembled)
4. Component Breakdown and Dimensions
5. Material
6. Usage Features
7. Maintenance Features
8. Assembly Recommendations

The Vita Country Corner Picket is a decorative and functional fencing solution designed to create an attractive corner boundary. Available in both white vinyl (VA20234) and brown composite vinyl (VA84050), this product offers durability and a classic aesthetic for various outdoor settings.

Function Description:

The primary function of the Country Corner Picket is to establish a corner section of a fence, providing both a visual boundary and a decorative element. It is designed for relatively easy assembly, allowing users to create a sturdy and aesthetically pleasing corner without extensive construction knowledge. The system utilizes a combination of posts, rails, and pickets that interlock to form a robust structure. The design incorporates varying picket heights to create a stepped, descending pattern, which is characteristic of a "country corner" style. This not only adds to its visual appeal but also allows for a gradual transition in fence height. The fence is intended for ground installation, with posts set into dug holes, optionally secured with concrete for enhanced stability.

Important Technical Specifications:

Overall Dimensions (Assembled):

• Height: Approximately 48.9 inches (124.1 cm) at the highest point (corner post).
• Width (along each side from corner): Approximately 42.5 inches (108.0 cm).
• Depth of Post Installation: 12 inches (30.5 cm) below ground level.

Component Breakdown and Dimensions:

1. Corner Post (1 piece):

   • Dimensions: 3" x 3" x 43" (8 cm x 8 cm x 109 cm)
   • Material: White Vinyl (10785) or Brown Composite Vinyl (14094)
   • Function: The central structural element at the corner, providing attachment points for rails.

2. Top Rails (2 pieces):

   • Dimensions: 1 1/2" x 1 1/2" x 44.73" (4 cm x 4 cm x 114 cm)
   • Material: White Vinyl (10787) or Brown Composite Vinyl (14095)
   • Function: Horizontal supports for the top of the pickets, connecting the corner post to the end posts. Features holes on both sides for picket insertion.

3. End Post (2 pieces):

   • Dimensions: 3" x 3" x 38" (8 cm x 8 cm x 97 cm)
   • Material: White Vinyl (10786) or Brown Composite Vinyl (14096)
   • Function: The outer structural elements at the ends of each fence section, connecting to the rails.

4. 18" Pickets (6 pieces):

   • Dimensions: 7/8" x 3" x 18" (2 cm x 8 cm x 46 cm)
   • Material: White Vinyl (10132) or Brown Composite Vinyl (14097)
   • Function: Vertical fence elements, forming the shortest pickets in the descending pattern.

5. 19" Pickets (2 pieces):

   • Dimensions: 7/8" x 3" x 19" (2 cm x 8 cm x 48 cm)
   • Material: White Vinyl (10133) or Brown Composite Vinyl (14098)
   • Function: Vertical fence elements, slightly taller than the 18" pickets.

6. Bottom Rails (2 pieces):

   • Dimensions: 1 1/2" x 1 1/2" x 44.73" (8 cm x 8 cm x 114 cm)
   • Material: White Vinyl (10788) or Brown Composite Vinyl (14099)
   • Function: Horizontal supports for the bottom of the pickets, connecting the corner post to the end posts. Features holes on one side for picket insertion and locking tabs.

7. 20 1/2" Pickets (2 pieces):

   • Dimensions: 7/8" x 3" x 20 1/2" (2 cm x 8 cm x 52 cm)
   • Material: White Vinyl (10134) or Brown Composite Vinyl (14100)
   • Function: Vertical fence elements, taller than the 19" pickets.

8. 23" Pickets (2 pieces):

   • Dimensions: 7/8" x 3" x 23" (2 cm x 8 cm x 58 cm)
   • Material: White Vinyl (10135) or Brown Composite Vinyl (14101)
   • Function: Vertical fence elements, forming the tallest pickets in the descending pattern (excluding the corner post).

Material:

• White Vinyl: Provides a clean, classic look.
• Brown Composite Vinyl: Offers a natural wood-like appearance with the benefits of composite material.
• Both materials are chosen for their durability and low maintenance.

Usage Features:

• DIY Assembly: The product is designed for self-assembly, with clear, step-by-step instructions provided. No specialized tools are required beyond basic household items.
• Interlocking Design: Rails and pickets are designed to lock into place permanently once inserted past the locking tabs, ensuring a secure and stable structure.
• Adjustable Depth: The assembly process allows for adjustment of post depths during initial setup to ensure the fence is level, accommodating minor variations in ground conditions.
• Optional Concrete Reinforcement: For enhanced post stability, especially in areas with loose soil or high winds, the use of pre-mix concrete is recommended for the post holes.
• Aesthetic Appeal: The descending picket pattern creates a visually appealing "country corner" style, suitable for various garden and yard designs.
• Versatile Placement: Can be used to define garden beds, mark property corners, or simply add a decorative touch to an outdoor space.
• Pre-sorted Components: All necessary parts are included in the box, with a recommendation to check the inside of the posts for all materials, indicating efficient packaging.

Maintenance Features:

• Durable Materials: Both vinyl and composite vinyl are known for their resistance to weathering, rot, insects, and fading, significantly reducing the need for frequent maintenance.
• Low Maintenance: Unlike traditional wood fences, this product does not require painting, staining, or sealing.
• Easy Cleaning: The smooth surfaces of vinyl and composite vinyl can typically be cleaned with soap and water, making upkeep simple.
• Long-lasting: The robust construction and material properties contribute to a long lifespan, offering a durable fencing solution with minimal ongoing effort.
• No Rusting: As the components are not made of metal, there is no concern for rust, which is a common issue with some outdoor products.

Assembly Recommendations:

• Read Instructions Carefully: Thoroughly reviewing the manual before starting is crucial for a smooth assembly process.
• Non-Abrasive Surface: Assembling components on a soft surface (e.g., the shipping box) is advised to prevent scratching the materials.
• Adequate Workspace: An area of approximately 10 ft. x 8 ft. (3 m x 2.4 m) is recommended for unobstructed assembly.
• No Excessive Force: Components are designed to fit without requiring excessive force, indicating a precise manufacturing process.
• Check All Materials: Before beginning, verify that all parts are present and undamaged. Contact customer service for any missing or defective components.
• Leveling: A tape measure and a level are essential tools for ensuring proper post depth and overall fence alignment.
• Post Orientation: Special attention must be paid to the orientation of the rails and posts during assembly to ensure the picket holes align correctly. The locking tabs on the rails and pickets are designed for permanent installation, so correct alignment is critical before fully engaging them.

vita Country Corner Picket Specifications