What to do if VITAI VDG-360 Two-Way Radio failed to transmit or receive?
If your VITAI Two-Way Radio fails to transmit or receive, first, reset the channel parameters and try again. Also, ensure that you have selected the correct group identity for your default contact. If the issue persists, you might be beyond the communication scope.
How to fix VITAI VDG-360 Two-Way Radio that failed to power on?
If your VITAI Two-Way Radio won't power on, the battery might be dead. Try charging the battery or replacing it with a new one. Alternatively, the volume switch could be faulty, requiring repair at a specified service station.
Why is the voice so small on VITAI VDG-360 Two-Way Radio calls?
If you're experiencing a small voice during a call on your VITAI Two-Way Radio, make sure you are speaking within 3-10cm of the microphone. Also, check the volume setting and turn the volume knob clockwise to increase the volume.
Procedures to decrease exposure and ensure compliance with RF exposure limits.
Statement on intended use for occupational/controlled applications and RF exposure compliance.
Step-by-step instructions for charging the radio's lithium-ion battery and important notes.
Details on how programmable keys (side keys) can be set by dealer as shortcut keys for various functions.
Instructions on how to turn the radio on and off using the power/volume knob.
Guide to initiating, receiving, and replying to calls in digital and analogue modes.
How to use Emergency alarm features and Kill/Unkill security functions.
Solutions for problems related to failing to power on or experiencing small voice during calls.
Troubleshooting steps for issues with transmitting or receiving signals.
General| Brand | VITAI |
|---|---|
| Model | VDG-360 |
| Category | Two-Way Radio |
| Language | English |
To Next Page