Do you have a question about the VITALI T5 and is the answer not in the manual?
Details circumstances under which the warranty is void or not applicable.
Step-by-step guide for attaching the backrest to the chair frame.
Instructions for correctly fitting the backrest housing onto the chair structure.
Procedure for attaching the dental unit bracket to the chair assembly.
Guide for mounting the water unit onto the dental chair.
Steps to correctly assemble the arm for the instrument table.
Instructions for fastening the assembled tray table to the instrument table support.
Connecting the water unit, dental unit bracket, and instrument table arm to ground.
Guide to making the electrical connections for the water unit.
Steps for attaching the instrument table to its support.
Details on connecting hydraulic and pneumatic lines to the instrument table.
Guide for connecting Rilsan hoses to solenoid valve groups for instrument control.
Connecting electrical components to the instrument table's control cards.
Connecting water lines to the water unit.
How to connect the suction and flushing systems for the bowl.
Connecting hydraulic and pneumatic lines to the main connector block.
Installing the suction tube support arm and its grounding.
Configuring the chair movement functions using dip-switches.
Steps to remove the protective guard to access internal components.
Procedure for removing the seat upholstery for maintenance or access.
Steps for correctly refitting the seat upholstery after maintenance.
Guide for removing the backrest upholstery.
How to remove the upholstery from the double-jointed headrest.
Steps to remove the upholstery from the coplanar headrest.
Procedure for taking apart the headrest bracket.
Steps to remove the seat housing.
Guide for removing the fixed armrest.
Steps to remove the optional tilting armrest.
Procedure for removing the lower parallelogram housing.
Steps to remove the upper parallelogram housing.
Description of different configurations available for the water unit.
Guide to replacing fuses on the dental unit card and identifying errors.
Configuring dental unit functions via dip-switches on the main card.
Guide for making electrical connections to the assistant console slots.
Procedures for adjusting and setting up the instruments on the table.
Diagram illustrating the hydropneumatic system for turbine operation.
Explains functions controlled by the assistant/patient keypad on the console.
Details the functions and operation of the electronic foot control.
How to set up and configure the electronic foot control using dip-switches.
Explanation of the functions of the two-lever foot control.
Describes the safety mechanism for the chair backrest.
Explains the safety feature that prevents unintended chair lowering.
Safety feature disabling chair movement when an instrument is active.
Safety feature preventing simultaneous operation of multiple dynamic instruments.
Safety preventing chair/instrument operation when foot control is active.
Step-by-step guide for replacing the vertical chair movement gearmotor.
Procedure for replacing the backrest actuator.
How to adjust the friction for the backrest movement cradle.
Adjusting the mechanical memory for vertical chair movement.
Adjusting the mechanical memory for backrest movement.
How to adjust the friction for the instrument table support panel.
Steps for replacing the bowl in the water unit.
Guide for assembling and routing instrument cords on the table.
How to assemble the stop for the instrument table arm.
Steps to assemble the instrument table arm.
Guidelines and product recommendations for disinfecting VITALI equipment.
Lists parts that can be sterilized in an autoclave.
Daily maintenance for surgical suction filter and cannula tubes.
Daily maintenance for cleaning the bowl filter.
Weekly procedure for emptying the water vessel.
Monthly check and maintenance of the turbine lubrication oil recovery device.
Procedure for replacing the air unit filter every two years.
Comprehensive wiring diagram for the VITALI T5 dental unit.
| Category | Medical Equipment |
|---|---|
| Type | Infrared Thermometer |
| Response Time | ≤ 1 second |
| Memory Capacity | 32 readings |
| Display | LCD |
| Measurement Range | 32°C - 42.9°C (89.6°F - 109.2°F) |
| Accuracy | ±0.2°C (±0.4°F) |
| Battery | 2 x AAA |
| Auto Power Off | ≤ 30 seconds |