Vitamix Turboblend - Care and Cleaning; Container Cleaning and Break-in; Lid, Lid Plug, and Tamper Cleaning

19
Container
To prepare your new machine for initial use, follow the steps below. This will clean
the unit and break-in the motor.
1. Fill the container half full with warm water and add a couple drops of liquid
dish washing detergent to the container.
2. Snap or push the complete 2-Part lid into locked position.
3. Start with the High/Low Switch in the Low ( ) position. Activate the machine
by switching the On/Off Switch to On (|). The machine will start on Low then
switch the High/Low Switch to High ( ).
4. Run the machine on High for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and eective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
CARE AND CLEANING