Vitamix VM0158A - Page 12

12
CONTROL PANEL
Pro-750 Models
2
3
4
5
OFF
ON
1
1. On / O Switch:
The On/Off (or Power) Switch is on the right-hand side of the machine base.
The On/Off Switch controls the power to the machine. BEFORE moving the
On / O Switch to the On (I) position, make sure that the marker on the
Variable Speed Dial is pointed at the Stop Symbol ( ) at the top of
the dial. Move the On / O Switch to the O position at night and
whenever the machine is left unattended.
If the On / O switch is moved to the O position to stop a program
mid-cycle, wait 30 seconds for power to recycle and the timer to reset
before moving the On / O switch back to the On position.
When the Pulse, Start / Stop, and Program Symbols brighten, the On / O
Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch:
After the marker on the Variable Speed Dial is rotated from the
Stop Symbol ( ) either to Variable Speed 1 or a Program, press the
Start / Stop Switch to start the machine and initiate the blending process.
Pressing the Start / Stop Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
program will start at the beginning.