Vitea Care Bubble Master - Introduction; Description of Product

3
1. Introduction
Alternating pressure anti-bedsore bubble mattress is equipped with end flaps which allows to place
the mattress on the bed. Made of PVC, which is a important to keep it clean. Manual adjustment of the
pressure in the mattress gives the possibility of individual adjustment to the patient's weight with a
weight up till 140 kg.
2. Description of product
Illustration 1.
1. Mattress belt
2. Mattress tubes
3. Pump
4. End laps
Elements that should be inside the packaging:
Illustration 2. Pump
Illustration 3. Connecting element.
1
4
2
3