Vitec Multimedia 06024 - Under Desk Mounting Bracket (06021); Kensington Lock Fitting

www.vitec.com
93-series Under Desk Mounting Bracket (part number 06021, avply-dbkt)
• Allows 93-series Media Players to be attached under a desk, shelf or on a wall.
• Can be used with r9300 and m9305 Media Players.
• Supplied with four M2.5 x 4mm screws.
To t the media player to a surface:
• Locate and prise o the removable feet from the underside of the device.
• Align the device as shown above and attach to the bracket using the two supplied M2.5x4mm Pozidriv screws.
• Use suitable fasteners to attach the completed assembly to a wall, or to the underside of a desk or counter surface as shown
above.
Fitting a Kensington Lock
Fitting a Kensington type lock to a 93-/95-series Media Player oers a method of securing the device whilst allowing easy access to
cables and re-positioning if required.
The following are required:
• A 93-/95-series Media Player
• Kensington lock
• Secure anchor point
To t a Kensington Lock:
1. Locate the Kensington Lock slot at the right rear of the device as shown below.
2. Secure the non-lock end of the cable.
3. Insert the lock into the device slot and secure.