Vitek Transcendent Series

To Next Page

VITEK

VT-TPTZ20HR-2PNS

Transcendent Series

2 MegaPixel

1/2.8” 20x PoE+ IP

Speed Dome Camera

QUICK START GUIDE

FEATURES

• 1/2.8” 2MP Sony STARVIS® CMOS Progressive Scan Sensor

• Superior Image Quality via High MTF 20x Zoom Lens and STARVIS®

to Capture Vivid Color Images in Low Light Conditions

• Max 30fps @ 2MP

• True WDR (Wide Dynamic Range)

• H.265 / H.264 / MJPEG

• High Efficiency Video Coding (H.265, ITU-T VCEG)

• Smart IR (2.0) with up to 500 foot IR Range

• Smart IR Lighting Sub-System, Improves Uniformity of Illumination

• 5.5-110mm Focal Length, 20x Optical Zoom Lens

• Zoom Speed Approximately 3.5s (Optical Lens, Wide-TELE)

• Aperture Range: F1.6 (Wide) to F3.5 (TELE)

• Day / Night w/ IR Cut Filter

• Smart Thermal Management (1.0), with a Built-In Temperature Sensor,

Highly Efficient Turbo Fan, and High Power Heater

• Built-in Micro SD Card Slot, Supporting up to 128GB

• 360° Endless Pan Range, and Pan Speed from 0.1°/s to 80°/s

• ONVIF Compliant with Zero Configuration

• 12VDC @ 3amps / PoE+ (20 watts)

• 12VDC Power Supply Included

• Optional Mounts: VT-TPT20HR-WM (Wall), VT-TPT20HR-PM

(Pendant), VT-TPT20HR-FM (Semi-Flush), VT-TPLMT-W (Pole Mount -

White), and VT-TCNMT-W (Corner Mount - White) Available

• IP 66 Ingress Protection

• 3-Year Warranty

*Sony STARVIS® is a registered trademark of Sony

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are

available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

*Shown with

optional wall mount

VT-TPT20HR-WM

Main Page

Other manuals for Vitek Transcendent Series

Manual12 pages

Installation Guide3 pages

Need help?

Do you have a question about the Vitek Transcendent Series and is the answer not in the manual?

Summary

Product Overview and Setup

Camera Overview and Connectors

Identifies Ethernet, power connectors, and safety wire on the camera.

Cable Connection Procedure

Guide for connecting Ethernet and power cables, including weather sealing.

Camera Installation Procedures

MicroSD Card Installation

Steps to insert a microSD card into the camera for storage.

Wall Mount Installation

Instructions for mounting the camera using the VT-TPT20HR-WM wall mount.

Ceiling and Pendant Mount Installation

Guides for installing the camera using VT-TPT20HR-PM ceiling or pendant mounts.

Semi-Flush Ceiling Mount Installation

Steps for installing the camera using the VT-TPT20HR-FM semi-flush ceiling mount.

Network Configuration and Access

LAN Configuration via IP-Tool

Steps to configure camera IP settings using the VITEK IP-Tool software.

Direct Web Browser Access

Guide to accessing the camera directly through a web browser after PC configuration.

WAN Configuration for Remote Access

Instructions for configuring WAN settings and port forwarding for remote access.

Specifications, Dimensions, and Accessories

Mounting Dimension Details

Provides detailed measurements for VT-TPT20HR-WM, VT-TPT20HR-PM, and VT-TPT20HR-FM mounts.

Detailed Product Specifications

Comprehensive technical specifications for the camera, including image, video, and power.

Optional Camera Accessories

Lists and illustrates optional mounting accessories for the camera.

Product Warranty and Compliance

Limited Product Warranty Information

Details the three-year limited warranty for VITEK products.

Class A Digital Device Compliance

States compliance with CE and FCC rules for commercial environments.