EasyManua.ls Logo

Vitek VT-1284 G - User Manual

Vitek VT-1284 G
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
3
9
17
23
30
37
Steam station
Паровая станция
4 G
VT1284.indd 1 28.01.2014 15:05:13

Table of Contents

Questions and Answers

  • J
    juliazamoraAug 10, 2025
    What to do if water leaks from the steam openings of the Vitek VT-1284 G soleplate?
    • C
      Charles MorganAug 10, 2025
      If water leaks from the steam openings of your Vitek Iron's soleplate, there could be a few reasons. First, ensure that the selected temperature mode is appropriate for steam ironing; set the ironing temperature within the range between «••», «•••» and «???». If you've paused ironing for a long time, the steam in the hose might have cooled and condensed; this is normal. Press the steam supply button, directing the soleplate away from clothing, and hold it until the water stops leaking. Also, scale and dirt inside the boiler can cause leaking; wait for the unit to cool completely and then clean the boiler.
  • A
    amanda74Aug 21, 2025
    Why is my Vitek VT-1284 G not generating steam?
    • J
      Jacob BrownAug 21, 2025
      If your Vitek Iron isn't generating steam, there are a couple of potential causes. First, make sure the unit is switched on using the power button. Also, check the water tank and fill it with water if it's not full enough.
  • C
    Charles WilliamsonAug 31, 2025
    How to fix a Vitek VT-1284 G that doesn’t heat up?
    • S
      Sharon JacksonAug 31, 2025
      If your Vitek Iron isn’t heating up, ensure the unit is switched on by pressing the power button and turn the temperature control knob on the iron to set the desired temperature.

Vitek VT-1284 G Specifications

General IconGeneral
Power2200 W
Soleplate MaterialCeramic
Steam Output40 g/min
Water Tank Capacity300 ml
Vertical SteamingYes
Anti-drip SystemYes
Self-cleaningYes
Voltage220-240 V
Frequency50-60 Hz

Related product manuals