Vitek VT-8269 - Trimmer Cleaning and Lubrication; Environmental Protection and Disposal; Delivery Set Contents; Technical Specifications

6
ENGLISH
·· Never immerse the fan or the power cord (8) into water
or any other liquids.
·· Do not use solvents or abrasives to clean the shaver.
·· To facilitate its cleaning, remove the shaving block (1)
from the shaver body (3).
·· Clean both the inner and outer side of the shaving block
(1) with a brush (10), clean the inner shaving blocks.
·· Install the shaving block (1) into its place and cover it
with the protective cap (9).
Trimmer
·· Clean the trimmer after each use.
·· Switch the shaver off.
·· Move the trimmer lock (7) upwards.
·· Clean the trimmer with the brush (10) supplied with the
unit.
·· Every six months lubricate the trimmer with a drop of oil
for sewing machines or hair clippers.
ENVIRONMENTAL PROTECTION
The shaver is provided with a disposable battery. Fully dis-
charge the battery of the inoperative shaver and dispose of
it according to the hazardous waste disposal regulations of
your country (fig. 7, 8) before disposing of the unit.
Do not throw away the shaver until you remove the built-in
battery.
DELIVERY SET
Men shaver – 1 pc.
Power cord – 1 pc.
Cleaning brush – 1 pc.
Travel pouch – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 3 W
Rechargeable battery: 1 x NiMh 500mA 1.2V
ATTENTION! Do not use the unit near water in the bath-
rooms, showers, swimming pools etc.
IM VT-8269_70x130.indd 6 21.05.2018 10:06:22