Pedal Installation Instruction
1 2
3 4
Step 1: Finding out the right pedal with the letter “R”, then align
the pedal axle with the hole on the right crank, and firstly use your
hands to correctly screw the pedal into the hole clockwise.
Step 2. Using a 15mm wrench to tighten the
right pedal clockwise.
Step 3: finding the left pedal with the letter” L” letter, then align the
pedal axle with the hole on the left crank, and firstly use your
hands to correctly screw the pedal into the hole counterclockwise.
Step 4: Lastly, use a wrench to tighten the left
pedal counterclockwise.
P12
To Next Page
Loading...
