16
(3-1) SMART NR: Distinguish the moving object not moving noise,
and auto close the “3D NR”.
(3-1-1) SMART NR：The sensitivity to detect the moving
object. The lower value gets higher sensitivity.
(3-1-2) RETURN: Return to last page.
(3-2) LEVEL：The threshold to judge noise.
(3-3) START AGC：Start auto gain control. When AGC value
is higher than setting, will start auto gain.
(3-4) END AGC：End auto gain control. When AGC value is
higher than setting, will end up auto gain.
(3-5) Return: Return to last page.
(3) Return: Return to last page.
To Next Page
Loading...
