28
Use knob ○
o
or ○
p
to adjust the distance from the object
lens to the object. When the distance is closer, the
magnification size is higher. When the focus distance is fixed,
use the remote controller or far distance control mode on the
application program to focus the image.
(2) Fixed image sensor position
The status bar will show on the screen (please refer to Section
1.3-(16)). Use the remote controller to adjust the image
sensor position based on magnification size, FOV, or working
distance. When the image sensor position is fixed, focus the
image by using knob ○
o
to adjust the height and knob ○
p
to
fine tune.
To Next Page
Loading...
