Need help?Do you have a question about the Vitrex Powercut 800 and is the answer not in the manual?
Provides comprehensive precautions for work area, electrical safety, user conduct, tool usage, personal protection, cord care, and tool maintenance. Includes staying alert and checking for damage.
Instructions for safely moving the bridge saw, including locking the cutting unit and requiring two people for lifting.
Details on blade direction, free rotation, securing bolts, cutting techniques, workpiece handling, water usage, and protective equipment.
Check points for motor voltage, grounded connection, and mains lead condition before operation. Advices on extension cables and surface stability.
Guide on filling the water tray to the correct level for blade cooling and draining the water after use.
Procedure for safely connecting to power, starting the saw using the green button, and stopping it with the red button.
Steps to position the tile and guide for a straight cut, and how to perform the cutting action smoothly.
Instructions for setting the rip/miter guide to the desired angle and performing the cut.
Steps to adjust the bridge angle for bevel cuts, aligning degree markings, and securing the position.
Procedure for safely disconnecting power and water, removing the blade guard, and replacing the diamond blade.
To Next Page
General