Vitrifrigo D20A - Page 22

22
ENG
8. START-UP
Once the refrigerator has been connected to the power supply, it will automatically start
up in thermostatic mode and it will not be necessary to perform further operations for its
correct operation.
For a reasonable arrangement and storage of food follow the following table:
Food
Preservation
time
Method of preservation
Clean meat and nish 2 or 3 days
Exclusively wrapped or closed in
airtight containers and placed in
the fridge aer they have cooled
down if previously heated
Eggs 1 month
Butter or margarine 1 week
Cooked foods, cakes and soups 3 or 4 days
Cold cuts, fresh pasta, creams, puddings,
chocolate, pastries, animal fats
3 or 4 days
9. FUNCTIONALITY AND ADJUSTMENT OF THE TEMPERATURE
The refrigerator works according to a refrigerant vapour compression cycle to transfer heat
between the air in the inner compartment and the outer one. The refrigerant, by extracting
heat from the air in the evaporator, evaporates and enters the compressor. Here, the
refrigerant undergoes an increase in pressure and temperature. It then passes through the air
condenser, where it is condensed. Finally, through the capillary tube, the refrigerant returns to
the evaporator and the cycle is repeated. This refrigerator (in all versions) is equipped with an
electronic thermostat for automatic temperature maintenance.
On/Standby
To turn on the refrigerator, press the relative button for 1 second. Now all functions
are active.
Refrigerator mode
In refrigerator mode, it is possible to choose between 4 dierent temperature levels;
to change the set, press the corresponding key (F).
A B C D E F
A Compressor error LED D NIGHT MODE key
B ON/STANDBY E Setting indication LED
C FREEZER mode key F Setting key