Need help?Do you have a question about the Vitrifrigo IM CL and is the answer not in the manual?
Keep ventilation openings clear and avoid mechanical defrosting aids.
Do not damage the refrigerant system and use only approved electrical devices.
Handle the product with care upon receipt, check for damage, and report issues.
Ensure proper installation, connections, and ventilation for safe operation.
Specific requirements for recessed installation of IM-CL and IM-XT models with ventilated condensers.
Guidelines for recessed installation of appliances with a ventilated remote motor.
Steps to adjust the appliance profile for total or partial recessed installation.
Instructions on how to fix and secure the appliance in its installed space.
Details on power supply access, circuit breakers, earthing, and safety.
Recommendations against adapters/extensions and ensuring proper cable suitability.
Procedure for starting the "Refill" model, including filling the tank.
Connection and start-up procedure for the "Hydro" model using water supply.
Explanation of the ice production cycle, including production and ejection phases.
How to switch to and operate the ice maker in Freezer mode.
Guidelines for cleaning the exterior and interior of the ice maker.
Recommendations for cleaning the condenser safely and effectively.
Checks to perform if the appliance is not powered or functioning at all.
Troubleshooting steps for unusual noise from the ice maker.
Checks for causes of low ice production, such as ventilation or heat sources.
Diagnosis for when the ice maker fails to produce ice, checking temperature and water.
Steps to take if the ice maker has ice but does not dispense it.
Keep ventilation openings clear and avoid mechanical defrosting aids.
Do not damage the refrigerant system and use only approved electrical devices.
Handle the product with care upon receipt, check for damage, and report issues.
Ensure proper installation, connections, and ventilation for safe operation.
Specific requirements for recessed installation of IM-CL and IM-XT models with ventilated condensers.
Guidelines for recessed installation of appliances with a ventilated remote motor.
Steps to adjust the appliance profile for total or partial recessed installation.
Instructions on how to fix and secure the appliance in its installed space.
Details on power supply access, circuit breakers, earthing, and safety.
Recommendations against adapters/extensions and ensuring proper cable suitability.
Procedure for starting the "Refill" model, including filling the tank.
Connection and start-up procedure for the "Hydro" model using water supply.
Explanation of the ice production cycle, including production and ejection phases.
How to switch to and operate the ice maker in Freezer mode.
Guidelines for cleaning the exterior and interior of the ice maker.
Recommendations for cleaning the condenser safely and effectively.
Checks to perform if the appliance is not powered or functioning at all.
Troubleshooting steps for unusual noise from the ice maker.
Checks for causes of low ice production, such as ventilation or heat sources.
Diagnosis for when the ice maker fails to produce ice, checking temperature and water.
Steps to take if the ice maker has ice but does not dispense it.
General| Brand | Vitrifrigo |
|---|---|
| Model | IM CL |
| Category | Ice Maker |
| Language | English |
To Next Page
