EasyManua.ls Logo

Vitrifrigo OCX - Page 16

Vitrifrigo OCX
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 ENG
1. INTRODUCTION
Dear client: Thank you for choosing one of our products.
Vitrifrigo hopes that you will be completely satised with your purchase.
This manual is considered an integral part of the refrigerator and must follow the sales
path to the user. The same can be consulted at the Vitrifrigo website www.vitrifrigo.com.
Each refrigerator, before being shipped, is thoroughly checked and tested to ensure it
operates correctly.
For further information or for any clarication, please contact one of our service centres
or any of our oces directly.
Vitri Alceste
Models
IM XT IM CL
2. GENERAL WARNINGS
This manual refers to models from the IM series.
For a complete list of models and their dimensions, refer to Annex 1.
Destination of the product:
This product must be used exclusively for the purposes of making ice. Vitrifrigo can
accept no liability for improper use.
Receipt
Check that the packaging is intact. If not, report it to the courier.
Remove the appliance from the packaging, operating with utmost caution; to avoid
accidental injuries, the use of protective gloves is recommended.
Check that the product has not been damaged.
Any damage must be reported to the reseller within 24 hours of taking delivery of the
appliance.
Installation
Install the product, taking the utmost care and caution to avoid accidentally
damaging the product. Use protective gloves.
Before connecting the ice maker, check that the network voltage corresponds with
that displayed on the appliance’s identication label or with that indicated on the
label on the compressor.
Following installation, check that the appliance does not rest on the power supply

Table of Contents

Related product manuals