VivaLNK VV330 User Manual

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Lorem ipsum

INSTRUCTIONS FOR USE

SDK 01

Medical Wearable Platform

LBL 75-06-78 Rev AA

Table of Contents

Questions and Answers:

R
Ricardo MoralesAug 6, 2025
What to do if VivaLNK Medical Equipment shows unusual data?
- H
  Helen CookAug 6, 2025
  If your VivaLNK Medical Equipment is showing unusual data, this could be due to several reasons. The device might be damaged, in which case you should contact your device provider. Alternatively, the device might not be worn correctly, so recheck its location and contact with your skin. The operating temperature could also be too high or too low; ensure you're using the device within the recommended temperature range. Improper skin preparation or incorrect adhesive attachment could also be factors; ensure you prepare your skin properly before application and follow the attachment instructions carefully.
M
Michael WilsonAug 17, 2025
What to do if VivaLNK Medical Equipment has no data or intermittent data received by SDK?
- J
  Jon SandersAug 17, 2025
  If you are experiencing no data or intermittent data being received by the SDK with your VivaLNK Medical Equipment, there are a few potential causes. First, ensure that Bluetooth is enabled on the device where the SDK is installed. If Bluetooth is on, check if the patch is out of connection range; if so, move the patch closer to the SDK-installed device. Another potential issue is interference from other RF emitters, such as RFID, metal detectors, or other medical equipment. To resolve this, move away from any electronic equipment, change rooms, or move to an open space.

VivaLNK VV330 Specifications

General

Device Type	Wearable Sensor
Connectivity	Bluetooth
Weight	10g
Dimensions	36mm x 20mm x 4.5mm
Water Resistance	IP67
Operating Temperature	10°C to 45°C
Category	Medical Equipment
Sensors	Temperature
Compatibility	Android and iOS