What to do if my Vivanco TVA 400 has bad reception?
If your Vivanco Antenna has bad reception, there might be a few reasons: * The antenna might not be connected properly, so ensure the power supply is connected. * The antenna might be switched off, so switch it on. * The cable connection might be broken, so check if all the plug connections are properly plugged in.
How to improve moderate reception on Vivanco Antenna?
If you are experiencing moderate reception with your Vivanco Antenna, consider the following: 1. The antenna may not be aligned properly. Turn the antenna until the best reception is achieved. 2. The antenna's position may be inconvenient. Try placing the antenna in another position in the room. 3. The amplification may not be set correctly. Turn the adjustment knob for the amplification until the best reception is set correctly. 4. The room may be heavily shielded from the transmitter. Use a window or external antenna. 5. There may not be a sufficiently strong transmitter in the vicinity. Please check with your provider if you are in the range of the transmission antenna.
Why does my Vivanco Antenna have bad reception?
Your Vivanco Antenna might have bad reception due to several reasons. It could be that the antenna is not connected, so ensure the power supply. Another reason could be that the antenna is switched off, so switch it on. Finally, the cable connection might be broken, so check if all the plug connections are plugged in properly.
Device purpose is receiving local, analogue and digital TV and radio programmes in private households.
Important safety instructions including not using damaged devices, supervising children, and proper electrical connections.
Instructions for assembling the antenna's support stand.
Guidance on connecting the device to the power supply.
Diagram and steps for connecting the antenna to a set-top box or DVB-T tuner.
Diagram and steps for connecting the antenna to a TV or radio.
Diagram and steps for connecting the antenna to a notebook or PC.
Instructions for turning the device on/off and adjusting amplification.
Details on input voltage, frequency range, and polarisation for the antenna.
Details on input voltage, output voltage, current, and consumption for the power supply.
Common problems like bad or moderate reception and their potential causes and solutions.
Guidelines for proper disposal of the device and its packaging.
General| Impedance | 75 Ohm |
|---|---|
| Connector | Coaxial |
| Amplifier | Yes |
| VHF | Yes |
| UHF | Yes |
| Type | Indoor |
| Cable Length | 1.5 meters |
To Next Page
