EasyManua.ls Logo

Vivarium Electronics VE-200 - Important Operational Notes; Support and Specifications; Limited Warranty Information

Vivarium Electronics VE-200
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Power output- The green indicator light on the front panel shows the power output level. A
steady off display indicates no power output. A steady on displays a full power on to the heater.
If flashing the rate of flash indicates the level of power being applied to the heater.
IMPORTANT:
It is very important that you inspect your thermostat sensor probe location and the integrity of
your heat source on a regular basis. If using under tank/tub heating it is especially important you
check the element on a regular basis and ensure that it is not above 105° F actual temperature
under the enclosure or an unsafe condition can arise. Heat can become trapped in these areas and
unless monitored can cause element failure.
Questions or Comments?-
You can contact Vivarium Electronics for support, general questions and other inquiries at
sales@reptilebasics.com
Visit the VE website for further information and to find a reseller near you at
www.vivariumelectronics.com
Vivarium Electronics is a division of Reptile Basics Inc.
Specifications:
700 Watt maximum Load
Fuse- 5mmx20mm glass fast acting 6.3 Amp
Operating Range- 40°F to 140°F
Night Drop- 30°F Maximum – requires optional Night Drop Module
Limited Warranty:
Vivarium Electronics warrants all components and workmanship of this unit for a period of one year from original date
of purchase and a maximum of two years from date of manufacture. Vivarium Electronics makes no warranty
expressed or implied, other than that stated herein. Vivarium Electronics warranty of merchantability or any other
warranty, including this limited warranty, shall be limited solely and exclusively to the repair or replacement of a
defective product. Vivarium Electronics will in no event be liable for any special, incidental or consequential damages.
This warranty does not include failure caused by accident, misuse, any damage from any source or connection to faulty
or inappropriate electrical source.
This warranty shall be voided in the event the product is altered or tampered with in any way or used for any purpose
other than that for which it is intended
V2.0
2