What to do if the timer light is on but the Vivax ACP-09CH25ZNM won't turn on?
If the timer indicator lamp is lit but your Vivax Air Conditioner isn't working, the timer is likely activated and the unit is in ready mode. To resolve this, cancel the timer operation, and the unit should operate normally.
Why does the compressor and indoor fan stop sometimes in HEAT mode on my Vivax Air Conditioner?
In HEAT mode, the compressor and indoor fan of your Vivax Air Conditioner might stop occasionally if the room temperature gets too high. This is a protective measure to prevent the compressor from overheating.
Why do the indoor and outdoor fans on my Vivax ACP-09CH25ZNM stop sometimes in HEAT mode?
In HEAT mode, the indoor and outdoor fans on your Vivax Air Conditioner might stop occasionally. This occurs because the compressor operates in a reverse cycle to remove ice from the exterior. The indoor and outdoor fans won't operate intermittently for within 20% of the total heat operation.
Why does the compressor stop and fan speed decrease on my Vivax Air Conditioner in COOL or DRY mode?
In COOL or DRY mode, your Vivax Air Conditioner's compressor might stop intermittently, or the indoor fan speed might decrease. This happens to prevent the inside or outside air from freezing, depending on the air temperature.
Why is the outdoor compressor still running when my Vivax ACP-09CH25ZNM Air Conditioner is off in HEAT mode?
If your Vivax Air Conditioner is in HEAT mode and turned off, but the outdoor unit's compressor is still running, it's likely because the de-ice function is still active. The compressor will continue to run for up to 10 minutes until de-icing is complete.
Why can't I change the fan speed on my Vivax ACP-09CH25ZNM in AUTO or DRY mode?
When your Vivax Air Conditioner is in AUTO or DRY mode, you cannot manually set the fan speed. In DRY mode, the fan speed is automatically set to low. In AUTO mode, the fan speed is automatically selected from 3 steps.
Identifies the components of the indoor and outdoor units of the air conditioner.
Explains the different display models and indicator lamps on the air conditioner.
Details how to use the emergency operation switch when the remote is unavailable.
Provides instructions for cleaning the front grille and air filters of the unit.
Analyzes common causes and solutions when the air conditioner fails to operate.
Troubleshooting steps for a non-functional remote control.
Provides solutions for poor cooling or heating performance.
Details the operational temperature range for cooling and heating.
Explains how to select different operating modes like Auto, Cool, Heat, Fan, Dry.
Details the function of the I/O button for turning the unit ON/OFF.
Describes the auto mode which adjusts room temperature automatically.
Explains how to operate the cooling mode, adjust airflow, fan speed, and temperature.
Details the dry mode operation and its limitations on controls.
Describes the heating mode for models equipped with a heat pump.
Identifies the components of the indoor and outdoor units of the air conditioner.
Details how to use the emergency operation switch when the remote is unavailable.
Provides instructions for cleaning the front grille and air filters of the unit.
Analyzes common causes and solutions when the air conditioner fails to operate.
Troubleshooting steps for a non-functional remote control.
Provides solutions for poor cooling or heating performance.
Describes the auto mode which adjusts room temperature automatically.
Explains how to operate the cooling mode, adjust airflow, fan speed, and temperature.
Details the dry mode operation and its limitations on controls.
Describes the heating mode for models equipped with a heat pump.
General| Type | Split System |
|---|---|
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Power Consumption (Heating) | 0.85 kW |
| Noise Level (Indoor Unit) | 37 dB(A) |
To Next Page
