EN VIVAX
9
Installation Position
1. It is recommended that, for your convenience, the machine is positioned
close to your washing machine.
2. The tumble dryer must be installed in a clean place, where dirt does not
build up. Air must be able to circulate freely all round the appliance. Do
not obstruct the front air inlet or the air intake grilles at the back of the
machine.
3. To keep vibration and noise to a minimum when the dryer is in use, it
should be placed on a firm and level surface.
4. The feet must never be removed. Do not restrict the floor clearance
through deep pile carpets, strips of wood or similar. This might cause
heat built-up which would interfere with the operation of the appliance.
Level Adjusting
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit
level. If it is not, adjust the feet with a tool.
Power Supply Connection
1. Make sure that the voltage of the power supply is the same as the electric
specification of the dryer.
2. Do not connect the dryer with the power connection board, the universal
plug or socket, do not use multi-plug adapters and extension cables.
To Next Page
Loading...
Need help?
General
