EN VIVAX
19
MAINTENANCE
■ Cleaning and Care
Empty the water container
1. Hold and pull out the water container
with two hands.
2. Tilt the water container, pour out the
condensate water into basin.
3. Install the water container.
Clean the Lint door filter
1. Open the door.
2. Take out the filter door.
3. Open the filter and remove the fluff
on the filter, You can clean it in
water.
4. Dry the filter thoroughly before
installing it back.
5. Put Filter back into door.
Empty the water container after each use, the programme will be
paused and the Full LED icon “FUL“ will light if the water container
is full during the drying process. After the container is emptied,
the dryer can be restarted by pressing [Start/Pause] button.
Do not drink the condensate water.
Do not use the dryer without the water container.
Warning!
Filter doo
To Next Page
Loading...
Need help?
General
