VIVAX EN
14
7. If you push the【Start/Pause】button again, the delay function will be
paused.
8. If you want to cancel the “Delay” function, please press the 【On/Off】
button.
Time
Press the button continuously adjust the time of drying 20-60 minutes.
This function is specially designed for few small clothes, for example, one or two
cloth pcs, two pairs of socks or simillar.
When the【Warm】 or 【Cool】 or 【Refresh】 programme is selected, the 【
Time】 button can be used to adjust the drying time in 10 min. steps.
It is like using timer to control drying process, but only for „Warm“, „Cool“ or
„Refresh“ programmes.
Anti-Crease
This function prevents the laundry from creases. The laundry can be removed
during the anti-crease phase.
At the end of the drying cycle, the anti-crease time is 30 minutes (default) or
120 minutes (selected).
The 【Anti-Crease】 light will illuminate when the anti-crease function is
selected.
Function can't be selected on the following drying programmes: „Cool“,
„Refresh“, and „Wool“.
Intensity
You can adjust the dryness level of the laundry by pressing the【Intensity】
button.
1. The intensity function can be activated only before the programme start.
2. Intensity function can't be selected on the following drying programmes:
„Cotton Iron“,
“Warm“, „Cool“, „Refresh“, “Wool“, and „Delicate“.
My Cycle
Used to define and save your personal favourite programme, which is used
frequently.
1. Select the desired programme and other drying functions.
2. Press and hold the【Time】button for 3 seconds until the beep sounds
and the desired programme has been saved.
3. Turn the programme selector to the 【My Cycle】position, then you can
start your favorite programme.
If you want to change the 【My Cycle】settings, repeat the steps 1 and
2.
To Next Page
Loading...
Need help?
General
