VIVAX EN
16
OPERATIONS
Programme selector
1. Press the [On/Off] button.When the LED display screen brightens up, rotate
the programme knob to select the desired programme.
2. Select the [Delay] or [Time], [Intensity] or [Anti-Crease] functions for
additional option.
3. Press the [Start/Pause] key.
4. Press [On/Off] key after the programme has completed.
Programme start
The drum will keep rotating after the programme starts, the state light in the
display area will flash in sequence, the remaining time displayed will change
automatically.
Programme end
1. The drum will stop running after the programme ends, the working state LED
will show “0:00”. The dryer will start [Anti-crease] function if user doesn't
remove the load in time (refer to page 14).
Please press [On/Off] key to cut off power and pull the plug out.
2. Deal with the problems accroding to "Trouble Shootings", if there is a
unexpected stop during the drying procedure and the dryer show information
(refer to page 21).
Duringdrying,watermaycollectbetweenthewindow
and the seal. This does not affect the function of your
dryer!
Note!
To Next Page
Loading...
Need help?
General
