What to do if the “Add Water” indicator is on for my Vivax IM-122T?
If the “Add Water” indicator is illuminated, it means that the Vivax Ice Maker lacks water. To resolve this, stop the ice maker, add water to the unit, and then press the “ON/OFF” button to restart it.
Why is my Vivax Ice Maker cycle normal but no ice is formed?
If your Vivax Ice Maker is running a normal cycle but not producing ice, it could be due to a few reasons. The room temperature or the water temperature in the inner tank might be too high. The room temperature should be between 10-43?, and the water temperature should be between 8-32?. It is also possible that there is a refrigerant leak or a blockage in the cooling system pipe, which would require verification by a qualified technician.
Why is the “Ice Full” indicator on my Vivax Ice Maker?
The “Ice Full” indicator on your Vivax Ice Maker illuminates because the ice basket is full. Remove the ice from the basket. If you need to continue ice production, you can press and hold the “Select” button for 5 seconds to allow the unit to make ice for 10 cycles, even with the “Ice Full” indicator on.
How to stop ice cubes sticking together in my Vivax Ice Maker?
If ice cubes are sticking together in your Vivax Ice Maker, it could be because the ice-making cycle is too long or the water temperature in the inner tank is too low. Try these steps: 1. Stop the ice maker and let the ice blocks melt, then restart it. Select the small size ice cube option. 2. Replace the water in the tank, ensuring the water temperature is between 8-32?.
Covers general safety messages, DANGER/WARNING symbols, and basic precautions.
Warnings on appliance handling, material safety, and proper disposal methods.
Safe operation, storage, power, and intended use environments.
Guidelines for safe use by children, cleaning, and general maintenance.
Safety aspects of installation, grounding, and electrical connections.
Identifies and labels the key components of the ice maker unit.
Explains the layout and functions of the ice maker's control panel.
Instructions for unpacking the ice maker and initial setup procedures.
Step-by-step guide on how to operate the ice maker for ice production.
Detailed instructions for cleaning and maintaining the ice maker for longevity.
Addresses common problems with the ice maker and provides solutions.
Lists the technical specifications, model number, and electrical requirements.
Provides guidance on the proper and environmentally friendly disposal of the appliance.
States the product's compliance with applicable European standards and directives.
General| Water Tank Capacity | 2.2 L |
|---|---|
| Ice Shape | Bullet |
| Power Consumption | 120 W |
| Voltage | 220-240 V |
| Ice Making Capacity | 12 kg/day |
| Frequency | 50 Hz |
To Next Page
