EasyManua.ls Logo

Vivax PH-1502 - Page 58

Vivax PH-1502
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENG VIVAX
7
Connected Wattage
The total power consumption of this device can be up to
2500W (please check rating plate of the product). With this
connected load a separate supply line protected by a 16A
household circuit breaker is recommended.
CAUTION: OVERLOAD:
If you use extension leads, these should have a cable
cross-section of at least 2.5mm
2
.
Do not use any multiple sockets, as this device is too
powerful.
ASSEMBLY
Remove the heater and all the accessories
from the carton.
The panel convector heaters should be wall-
mounted or can be also set on castors
- Mount castors on the baseboard in
accordance with scheme G1.
WARNING: Do not use the heater unless the feet are
correctly attached if the heater is used as portable
appliance
G1

Related product manuals