Vivax PH-1502 - Parts Description

VIVAX ENG

8
PARTS DESCRIPTION
OPERATING
Place the heater on the floor at least 100 cm away from the
wall and any other objects such as furniture, curtains or plants.
(Make sure the power supply used corresponds to the one on
the rating label)
With the thermostat control switch and the power setting
switches in the '0' position, plug the heater into the main power
supply.
 Place the heater on flat stable surface
 Switch thermostat knob and Heater Power knob in off
position (“0”)
 Plug the heater in
 By turning, the handle of thermostat clockwise or counter
clockwise set the required temperature. For fast heating of the room set the
thermostat handle at maximum level and turn heater switch on position II.
For Energy save, turn Heating knob on position “I” (lower heater power).
1. Front protection grill
2. Support base
3. Castors
4. Power Switch control
5. Temperature control
6. Control panel cover
7. Rear panel
8. Wall mount bracket (*option)
9. Rubber wall post
1
2
3
4
5
6
7
8*
9