VIVI H6 - Operating Instructions; Meter Troubleshooting and Settings

3
Press the "+"
button for 2
seconds
during
power-on
state, the
system
defaults to
turning on the
front light.
When the
front light is
on, press the
"+" button for
2 seconds, the
system
defaults to
turn off the
front light.
3.2 Meter operation
3.3 Meter Solution Instruction:
1. Turn on the machine first and adjust the gear to high-speed gear;
2. Press the "+""-" buttons at the same time. Long press for 3 seconds to 5
seconds, this is the speed limit will be lifted;
3. If you want to restore the factory configuration after the speed limit is lifted,
Operating instructions
Hold the
button for
2s to switch
on/off the
E-Bike system.
The default
value is “low”
pedal assist
level. Full
Electric
Function (Pure
electric mode)
Press “+” to
crease into
pedal assist
level “Mid”.
Full Electric
Function
(Pure electric
mode)
Press “+”
again to move
into pedal
assist level
“High”. “High”
is the
maximum
power of PAS.
Full Electric
Function
(Pure electric
mode)
Foot riding
(without
pedal
assistant
and electric）