6.Saddle installation
6.1 Open the package and take out the saddle and seat post, then install the
rear reflector on the seat post
6.2 Insert the seat post into the frame.
6.3 Adjust the seat post to the height that best suits your riding position, and
tighten the quick release. （please make sure the quick release is locked
firmly）
7.Adjust the brakes, meters, and transmission system. tighten all of
them with tools.
8. Battery installation:
8.1 Take the battery out of the packing box first.
8.2 Install the battery on the battery rack in the Bike.
To Next Page
