Vivitar DVR 514

To Next Page

To Previous Page

1. Press the MENU button to open the menus for the current mode.

2. Press the UP or DOWN direction control buttons to scroll and select the Frame Rate menu.

3. Press the OK button to open the selected menu.

4. Press the UP or DOWN direction control buttons to highlight the desired menu option.

5. Press the OK button to select and save the desired option.

6. The selected option will appear to the right of the menu item.

7. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.

8. Press the MENU button to exit the menu and return to the previous screen.

9. Remember that this setting will be saved by your camera until you manually change the

setting or restore the camera‟s default factory settings.

Metering Menu

The Metering setting will affect how your camera focuses when capturing an image. Depending

on your selection, the camera will be more sensitive to focusing on particular areas in the display

and adjust the image color and lighting accordingly.

The Metering options include:

Center – Averages the light metered from the entire frame, but giving greater weight to the

subject in the center

Multi – Used in standard conditions the camera divides and adjusts the settings of the image into

several zones for light metering such as complex light conditions, position of subject, brightness,

background, direct light and scenes

Spot – Meters the area within the spot point frame at the center of the LCD to set the exposure

on the subject in the center of the monitor.