setting, restore the camera‟s default factory settings or Power Off the digital video camera.
Date Stamp Menu
Use this menu to set the camera‟s Time and Date indicator.
The Date Stamp options include:
Off, Date, Date & Time
1. Press the MENU button to open the menus for the current mode.
2. Press the UP or DOWN direction control buttons to scroll and select the Date Stamp menu.
3. Press the OK button to open the selected menu.
4. Press the UP or DOWN direction control buttons to highlight the desired menu option.
Off: There is no date „stamped‟ onto the image.
Date: There is a date „stamped‟ unto the image to document when the image was captured.
Date & Time: There is a date and time „stamped‟ unto the image to document when the
image was captured.
Note: The Date and Time can be set or changed using the Camera‟s Setup Menu > Date &
Time setting options.
5. Press the OK button to select and save the desired option.
6. The selected option will appear to the right of the menu item.
7. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.
8. Press the MENU button to exit the menu and return to the previous screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
To Next Page
Loading...
