2. Press the UP or DOWN direction control buttons to scroll and select the Slide Show menu.
3. Press the OK button to open the selected menu.
4. Press the UP or DOWN direction control buttons to highlight the desired menu option.
Start: Begins a Slide Show of all your captured photos.
- Select „Start‟ the press OK to begin your Slide Show.
Interval (1 – 10 seconds): Selects the time interval between photos viewed in the Slide
Show.
- You can choose between 1 second to 10 second intervals by selecting „Interval‟.
- Then press the LEFT or RIGHT direction control buttons to choose a specific interval
time.
- Press the OK button to save the desired interval setting.
Repeat: Repeats the Slide Show in a continuous loop.
- Select „Repeat‟ then press the LEFT or RIGHT direction control buttons to choose either
„Yes‟: to view Slide Show in a continuous loop or „No‟: to view the Slide Show once.
5. Once your settings are saved:
Use the UP or DOWN direction control buttons to select „Start‟.
Press OK to begin the Slide Show according to your settings.
Note: Press the UP button to pause and continue viewing the Slide Show.
Press the OK button to stop the Slide Show.
6. The selected option will appear to the right of the menu item.
7. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.
8. Press the MENU button to exit the menu and return to the previous screen.
9. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
To Next Page
Loading...
