- Press the OK button to save the desired interval setting.
Repeat: Repeats the Slide Show in a continuous loop.
- Select „Repeat‟ then press the LEFT or RIGHT direction control buttons to choose either
„Yes‟: to view Slide Show in a continuous loop or „No‟: to view the Slide Show once.
Use the UP or DOWN direction control buttons to select „Start‟. Press OK to begin the
Slide Show according to your settings.
Note: Press the UP button to pause and continue viewing the Slide Show.
Press the OK button to stop the Slide Show.
5. The selected option will appear to the right of the menu item.
6. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.
7. Press the MENU button to exit the menu and return to the previous screen.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Effect Menu
The Effect Menu allows you to choose interesting and creative color effects to add to the images
already captured with your camera.
The Effect options include:
Normal, B&W, Sepia, Negative, Red, Green, Blue
1. Press the MENU button to open the menus for the current mode.
2. Press the UP or DOWN direction control buttons to scroll and select the Effect menu.
3. Press the OK button to open the selected menu.
4. Press the UP or DOWN direction control buttons to highlight the desired menu option.
5. Press the OK button to select and save the desired option.
6. A new, separate photo is saved to your camera‟s SD memory card and you will return to
the Playback Mode with the new photo, showing your selected effect, full screen.
7. If you choose not to edit the photo, press the MENU button to exit the menu and return to
the previous menu.
To Next Page
