3. Press the UP or DOWN direction control buttons to highlight and select the TV-Out option
you desire:
NTSC ; PAL
4. Press the OK button to save your selection.
5. The selected option will appear to the right of the menu item.
6. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.
7. Press the MENU button to exit the menu and return to the previous screen.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
USB Menu
Using the USB cable included, connect the camcorder to your computer and use either as a
MSDC device or PC Cam device.
1. Press the UP or DOWN direction control buttons and select the USB option.
2. Press the OK button to open the USB submenu
3. Press the UP or DOWN direction control buttons to highlight the desired menu option.
4. Press the OK button to select and save the desired option.
5. The selected option will appear to the right of the menu item.
6. Press the LEFT /RIGHT or UP/DOWN buttons to select the next menu item.
7. Press the MENU button to exit the menu and return to the previous screen.
8. Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Format Menu
You can use the Format menu to delete all of the content that is currently on your camera‟s
memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera’s memory card.
To Next Page
Loading...
