7) Connect the USB cable provided in the package from the camera to the Pictbridge port of the
printer.
8) Once connected, follow the instructions on the printer to proceed with the printing process.
9) It you do not want to print the photo, select the “Cancel” option to exit the menu and return to
the previous mode.
SLIDE SHOW MENU
You can view a Slide Show of all the pictures taken with your camcorder by pressing the UP
Quick Function button while in Photo Playback Mode.
The Slide Show menu allows you to set the interval length of time that each picture will display
during the Slide Show and to play the Slide Show.
1) Press the OK/SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT buttons to scroll and select the ‘Slide Show’ menu.
3) To Select an Interval:
Press the UP or DOWN button to scroll through the menu options:
Time interval between photos: 3 Seconds, 5 Seconds, 10 Seconds
4) To Play the Slide Show:
PLAY: Press the UP or DOWN button to select ‘Play’ and then press the OK/SET button to
begin playing the Slide Show.
PAUSE: Press the UP button to pause the Slide Show and press again to continue playing.
STOP: Press the OK/SET button to exit the Slide Show.
Reminder: While in Playback Mode, view a photo and press the UP Quick Function button to
initiate the Slide Show. Press the UP button to pause the Slide Show and the OK/SET button to
stop the Slide Show.
VIVILINK FOR PHOTOS MENU
The ViviLink technology allows you to quickly and easily upload your camcorder’s photos and
videos to the social networks of your choice with the accompanying Vivitar Experience™ Image
Manager application.
1) Select the photo you to which you would like to add a ViviLink.
To Next Page
Loading...
