Factory Settings Menu
Use this menu to view the Firmware version on your camera or to reset your camera settings to the factory
default settings.
1) The “Default Setting” is selected.
2) Press the OK button to reset the camera to the factory default settings.
3) You will be asked to confirm your wish to restore all of the factory settings.
4) Press the UP or DOWN buttons to select “Yes” and press the SET button to begin the format.
5) The camera will be reset.
6) A message will appear indicating that the settings have been reset successfully.
Photo Playback Mode
When you first turn on the camera, the camera will be in Video Capture mode by default. Press the MODE
button twice to open the Playback Mode. The playback mode will allow you to review and edit photos and
videos that you‟ve already taken with you camera.
Viewing Photos on Your Camera
To Next Page
Loading...
