Vivo STAND-TEN01B User Manual (English)

Need help?

Do you have a question about the Vivo STAND-TEN01B and is the answer not in the manual?

Vivo STAND-TEN01B Specifications

General

Brand	Vivo
Model	STAND-TEN01B
Category	Speakers
Language	English

Summary

Black Floating Speaker Stand Instruction Manual

Safety and Components

Important Safety Warnings

Provides critical safety instructions and warnings, including choking hazards and weight limitations for safe product use.

Package Contents Overview

Lists all the parts and hardware included in the product package for assembly verification.

Required Tools for Assembly

Details the necessary tools, such as a Phillips screwdriver, required for assembling the speaker stand.

Assembly Instructions

Step 1: Attach Base Support Bar

Connects the Base Support Bar (K) to the Base (J) using M6x25 screws (D) and an Allen wrench (F).

Step 2: Attach Shelf Support Bar

Connects the Shelf Support Bar (L) to the Shelf (I) using M5x30 screws (E) and a Phillips screwdriver.

Step 3: Install Binding Barrels and Cables

Inserts Binding Barrels (C) into the Shelf (I) and attaches Outer Cables (B) to Barrels and Base (J).

Step 4: Connect Inner Cable to Base

Attaches the Inner Cable (A) to the bottom of the Base Support Bar (K) and tightens it using Wrench (G).

Step 5: Connect Inner Cable to Shelf

Connects the Inner Cable (A) to the top of the Shelf Support Bar (L), adjusting if necessary.

Step 6: Apply Base Soft Pads

Applies Soft Pads (H) to the underside of the Base (J) to protect surfaces and stabilize the stand.

Customer Support and Contact

Contact Information and Hours

Provides VIVO's contact details, operating hours, and support channels for assistance.

Support Response Metrics

Details average response and resolution times for different support channels, offering insight into service levels.

Vivo STAND-TEN01B User Manual

Table of Contents