6
System Connection
The following diagram illustrates the typical input and output connections of the
extender:
1) The ARC mode of receiver is ON, and the display device (e.g. HDTV) supports
ARC. The TV audio is transmitted from the TV back to the receiver via HDMI cable,
and then it will be output by the ARC Audio Out port of transmitter.
Note: The STP cable is recommended to be used to ensure optimal machine
performance in ARC mode.
1
2 3 4
Tx Rx
LINKHDCP
Tx Rx
LINKHDCP
Speaker Laptop
Remote
HDTV
HDMI:
HDBaseT:
Audio:
IR:
RS232:
ARC
ARC
Tx
Rx
IR
Receiver
PoC
4K 40m 1080P 70m ,
IR
Emitter
To Next Page
Loading...