Need help?Do you have a question about the Vivosonic Integrity V500 and is the answer not in the manual?
Describes the system's value for hearing loss estimation and diagnosis.
Lists essential pre-operation checks and preparations for the system.
Step-by-step guide on how to insert the battery pack into the VivoLink.
Guides the user through initial power-up and patient setup for testing.
Covers system setup, transducer selection, patient preparation, and electrode placement for ABR tests.
Details the process of checking impedance and initiating the ABR test procedure.
Covers setup, transducer choice, patient preparation, and electrode sites for ABR screening.
Details the steps to run and complete an ABR screening test.
Covers setup, electrode application, and ear tip insertion for EcochG testing.
Details the procedure for running and saving EcochG test results.
Covers setup, patient environment, preparation, and electrode sites for ASSR tests.
Details the procedure for running and saving ASSR test results.
Covers setup, probe selection, and the essential cavity check procedure for OAE testing.
Details the correct OAE probe insertion and the steps to run the test.
Covers setup, patient environment, preparation, and electrode sites for 40 Hz ERP tests.
Details the procedure for running and saving 40 Hz ERP test results.
Explains how to access and view patient and test data within the system database.
Guides on how to search and filter records in the database for specific information.
Instructions on how to identify and permanently remove selected records from the database.
Procedures for backing up and restoring the entire system database to prevent data loss.
Step-by-step instructions for charging the Vivosonic battery pack using the provided cradle and charger.
Lists conditions where the device should not be used to ensure patient safety.
Covers essential safety guidelines for performing tests and handling equipment.
Details potential patient discomfort or harm and the corrective actions to take.
Guidelines for proper electronic disposal and environmental requirements for transport and use.
Details compliance levels for various immunity tests according to IEC 60601.
Outlines RF emissions compliance and suitability for different electromagnetic environments.
States compliance with FCC Part 15 and RSS 210, including operational conditions.
Provides common troubleshooting steps for battery, connection, and noise issues.
Instructions for cleaning and maintaining Amplitrode, VivoAmp, transducers, and OAE probes.
Guidelines for disposing of the equipment according to WEEE directive.
Lists common system components applicable to all configurations of the Integrity V500.
Details components specific to ABR, Screening, OAE, and EcochG test configurations.
Provides key technical details for the main V500 unit, including power, classification, and dimensions.
Details specifications for the battery pack cradle and charger, including input power.
Explains the meaning of various symbols and labels found on the instrument and its packaging.
General| Brand | Vivosonic |
|---|---|
| Model | Integrity V500 |
| Category | Test Equipment |
| Language | English |
To Next Page