Vivotek IB9365-EHT-A - Page 207

VIVOTEK
User's Manual - 207
© 2019 VIVOTEK INC. All Right Reserved
70
NAME
VALUE
SECURITY(
get/set)
DESCRIPTION
65_bitrate
_c<0~(n-1)>_h265_maxbit
rate"
mode.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= cbr
s<0~(m-1)>_h2
65_prioritypoli
cy
framerate,imagequality
4/4
Set prioritypolicy
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when
"h265_ratecontrolmode"= cbr
s<0~(m-1)>_h2
65_maxframe
1~"capability_videoin_c<0
~(n-1)>_h265_maxframera
te"
1/4
The maximum frame rates of a H265
stream at different
resolutions("capability_videoin_c<0~(
n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h265
_maxframerate"
* Only available when h265 is listed in
"capability_videoin_codec".
s<0~(m-1)>_h2
65_profile
Available values are listed
in "
capability_videoin_c<0~(n
-1)>_h265_profile"
1/4
Indicate H265 profiles
* Only available when h265 is listed in
"capability_videoin_codec".
s<0~(m-1)>_h2
65_smartq_en
able
<boolean>
4/4
Enable "Smart Q" function.
* Only available when h265 is listed in
"capability_videoin_codec".
* Only available when
"capability_videoin_c<0~(n-1)>_smart
q_support" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0309a.
s<0~(m-1)>_mj
peg_ratecontr
olmode
cbr, vbr
4/4
cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames are
encoded in the same quality.
s<0~(m-1)>_mj
1~5,
4/4
* Only valid when
© 2019 VIVOTEK INC. All Right Reserved
71
NAME VALUE SECURITY(
get/set)
DESCRIPTION
peg_quant 99, 100 "mjpeg_ratecontrolmode"= vbr.
Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
s<0~(m-1)>_mj
peg_qvalue
10~200
(Only valid when
"capability_api_httpversio
n" format is XXXXX_1 or
XXXXX_3 or XXXXX_4
ex: 0301a_1 or 0301a_3 or
0301a_4)
or 1~99
(Only valid when
"capability_api_httpversio
n" format is XXXXX_2,
ex: 0301a_2)
<product dependent>
4/4 Manual video quality level input. The
Q value which is used by encoded
library directly.
* Only valid when
"mjpeg_ratecontrolmode"= vbr and
s<0~(m-1)>_mjpeg_quant = 99
s<0~(m-1)>_mj
peg_qpercent
1~100 4/4 Select customized quality in a
normalized full range.
1: Worst quality
100: Best quality
* Only valid when
"mjpeg_ratecontrolmode"= vbr and
s<0~(m-1)>_mjpeg_quant = 100.
s<0~(m-1)>_mj
peg_maxvbrbit
rate
20000~"capability_videoin
_c<0~(n-1)>_mjpeg_maxbi
trate"
4/4 The maximum allowed bit rate in fixed
quality mode.
When the bit rate exceeds this value,
frames will be dropped to restrict the
bit rate.
* Only valid when