Vivotek IB9365-EHT-A - Page 225

VIVOTEK
User's Manual - 225
© 2019 VIVOTEK INC. All Right Reserved
88
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
0312a.
disableirled
<Not
recommended to
use this>
<boolean>
6/6
Enable/disable built-in IR led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and irled is listed in
"capability_daynight_ illuminators
_builtin_type"
* We replace this parameter with
"ircutcontrol_illuminators_builtin_irle
d_enabled" when the version number
(httpversion) is equal or greater than
0312a.
enableextled
<Not
recommended to
use this>
<boolean>
1/6
Enable/disable external IR led
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0".
* We replace this parameter with
"ircutcontrol_illuminators_external_d
o_enabled" when the version number
(httpversion) is equal or greater than
0312a.
enablewled
<Not
recommended to
use this>
<boolean>
6/6
Enable/disable built-in White led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and whiteled is listed
in "capability_daynight_ illuminators
_builtin_type"
* We replace this parameter with
"ircutcontrol_illuminators_builtin_whi
teled_enabled" when the version
number (httpversion) is equal or
greater than 0312a.
bwmode
<Not
recommended to
use this>
<boolean>
6/6
Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
© 2019 VIVOTEK INC. All Right Reserved
89
NAME VALUE SECURITY
(get/set)
DESCRIPTION
blackwhitemode" is 1.
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_bwmode”
when the version number
(httpversion) is equal or greater than
0312a.
sensitivity
<Not
recommended to
use this>
low,normal,high,1~10
0
6/6 Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
* We replace this parameter with
ircutcontrol_c<0~(n-1)>_sensitivity”
when the version number
(httpversion) is equal or greater than
0312a.
spectrum_mode
<Not
recommended to
use this>
visible,
ir,
irenhanced,
blueenhanced
<product dependent>
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_spectrum
_mode".
6/6 Set spectrum method .
* Only available when
"capability_daynight_illuminators_
spectrum _support > 0".
* We replace this parameter with
"ircutcontrol_illuminators_spectrum_
mode"
when the version number
(httpversion) is equal or greater than
0312a.