Vivotek IB9365-EHT-A - Page 233

VIVOTEK
User's Manual - 233
© 2019 VIVOTEK INC. All Right Reserved
96
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
1
dnr_mode
<product
dependent>
<boolean>
4/4
3D noise reduction.
0:disable
1:enable
* Only available when
"capability_image_c<0~(n-1)>_dnr" is
1
dnr_strength
<product
dependent>
1~100
4/4
Strength of 3DNR
* Only available when
"capability_image_c<0~(n-1)>_dnr" is
1
defog_mode
<product
dependent>
<boolean>
4/4
Enable/disable defog mode.
0:disable
1:enable
* Only available when
"capability_image_c<0~(n-1)>_defog_
mode" is 1
defog_strength
<product
dependent>
1~100
4/4
Strength of defog
* Only available when
"capability_image_c<0~(n-1)>_defog_
mode" is 1
eis_mode
<product
dependent>
<boolean>
4/4
Electronic image stabilizer
0:disable
1:enable
* Only available when 'eis' is listed in
"capability_image_c<0~(n-1)>_is_mod
e".
eis_strength
<product
dependent>
1~100
4/4
Strength of electronic image stabilizer
* Only available when 'eis' is listed in
"capability_image_c<0~(n-1)>_is_mod
e".
dis_mode
<product
dependent>
<boolean>
4/4
Digital image stabilizer
0:disable
1:enable
* Only available when 'dis' is listed in
"capability_image_c<0~(n-1)>_is_mod
© 2019 VIVOTEK INC. All Right Reserved
97
NAME VALUE SECURITY
(get/set)
DESCRIPTION
e".
dis_strength
<product
dependent>
1~100 4/4 Strength of digital image stabilizer
* Only available when 'dis' is listed in
"capability_image_c<0~(n-1)>_is_mod
e".
scene_mode
<product
dependent>
visibility,
noiseless,
lpcparkinglot,
lpcstreet,
lpchighway,
auto,
deblur,
lpcfreeway
<product dependent>
* Available values are
listed in
“capability_image_c<
0~(n-1)>_scenemode_
supporttype”
4/4 Value of scene mode
* Only available when
"capability_image_c<0~(n-1)>_scene
mode_support" is 1
restoreatwb
<positive integer>
4/4 Restore of adjusting white balance of
image according to mode settings
freeze
<product
dependent>
<boolean> 4/4 Enable/disable Image freeze while
patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze"
is 1
deinterlace_enable <boolean> 4/4 Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinter
lace_support" is 1.
deinterlace_mode spatial,blend 4/4 Users can choose between two
different deinterlacing techniques: