Vivotek IB9365-EHT-A - Page 287

VIVOTEK
User's Manual - 287
© 2019 VIVOTEK INC. All Right Reserved
150
Group: capability_daynight_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
support
<boolean>
0/7
Indicate whether the camera supports
day/night mode switch
builtinir
<boolean>
0/7
Indicate whether to support built-in IR
led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_support” when the version number
(httpversion) is equal or greater than
0312a.
builtinwled
<boolean>
0/7
Indicate whether to support built-in
white led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_type=whiteled” when the version
number (httpversion) is equal or greater
than 0312a.
externalir
<boolean>
0/7
Indicate whether to support external IR
led.
* We replaced this parameter with
“capability_daynight_illuminators_exter
nal_support” when the version number
(httpversion) is equal or greater than
0312a.
optimizedir
<boolean>
0/7
Indicate whether to support optimized
IR control technology.
* We replaced this parameter with
“capability_daynight_illumintators_opti
mizedir” when the version number
(httpversion) is equal or greater than
0312a.
smartir
<boolean>
0/7
Indicate whether to support smart IR.
ircutfilter
<boolean>
0/7
Indicate whether to support IR cut.
lightsensor
<boolean>
0/7
Indicate whether to support light
sensor.
© 2019 VIVOTEK INC. All Right Reserved
151
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
blackwhitemode <boolean> 0/7 Indicate whether to support
automatically switch to Black & White
display during the night mode.
* We support this parameter when the
version number
(httpversion) is equal or
greater than 0302a.
ircutsensitivity_type <string> 0/7 Indicate the cgi interface of
"ircutcontrol_sensitivity".
"options": the value of
"ircutcontrol_sensitivity" parameter is
"low, normal,high".
"normalize": the value of
"ircutcontrol_sensitivity" parameter is
"1~100"
"-":not support
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
ircutsensitivity_supportle
vel
0,
<positive integer>
0/7 The value indicate the support strength
level of ircutsensitivity.
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1 and
"capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type" is not "-".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.