VIVOTEK
User's Manual - 291
© 2019 VIVOTEK INC. All Right Reserved
154
auto,daynight,di,di2,
di3,di4,schedule,-
<product
dependent>
Indicate the day / night switch mode.
"auto": The Camera automatically
judges the current operation mode by
the level of ambient light detected.
"daynight": support day mode and night
mode. In day mode, the camera
streams color video. In night mode, the
camera streams black and white video
in low light environments.
"di": the camera automatically switches
the current mode when a ditigal input 1
is triggered.
"di2": the camera automatically
switches the current mode when a
ditigal input 2 is triggered.
"di3": the camera automatically
switches the current mode when a
ditigal input 3 is triggered.
"di4": the camera automatically
switches the current mode when a
ditigal input 4 is triggered.
"schedule": The Camera switches
between day mode and night mode
based on a specified schedule.
"-": not support
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309d.
Group: capability_daynight_illuminators
Indicate whether to support optimized IR
control technology.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
© 2019 VIVOTEK INC. All Right Reserved
155
builtin_support <boolean> 0/7 Indicate whether to support built-in led.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
builtin_type irled,whiteled,-
<product
dependent>
0/7 Indicate whether to support built-in led
type.
"irled": IR led
"whiteled": white led
"-": not support
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
external_support <boolean> 0/7 Indicate whether to support external led.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
external_interface do,do2,do3,do4
<product
dependent>
0/7 The device interface of external led:
"do": digital output 1
"do2": digital output 2
"do3": digital output 3
"do4": digital output 4
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
spectrum_support <boolean> 0/7 Indicate whether to support proposed a
brightness enhancement method based on
CCM(Color Correction Matrix) model
to improve the brightness effect of the
images if the IR and blue light exists.
* Only available when
"capability_daynight_c<0~(n-1)>_support"
is 1
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
To Next Page
Loading...
