Vivotek IB9365-EHT-A - Page 299

VIVOTEK
User's Manual - 299
© 2019 VIVOTEK INC. All Right Reserved
162
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
h264_maxbitrate
<positive integer>
0/7
Maximum bitrates of H.264.
The unit is bps.
* Only available when 'h264' is listed in
"capability_videoin_codec".
h264_profile
baseline,main,hig
h
0/7
Indicate H264 profiles
* Only available when 'h264' is listed in
"capability_videoin_codec".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309a.
h265_maxframerate
A list of <Positive
Integer> and "-"
0/7
Maximum fps that the device can encoded
with H.265 on resolutions in current video
mode.
"-" means not support.
* One to one mapping to the resolution in
"resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter may be changed when
"videoin_c<n>_cmosfreq"=50 or
"videoin_c<n>_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is
changed to 50 fps, and so on.
* Only available when 'h265' is listed in
"capability_videoin_codec".
h265_maxbitrate
<positive integer>
0/7
Maximum bitrates of H.265.
The unit is bps.
* Only available when 'h265' is listed in
"capability_videoin_codec".
h265_profile
main,main10
<product
dependent>
0/7
Indicate H265 profiles
* Only available when 'h265' is listed in
"capability_videoin_codec".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309a.
© 2019 VIVOTEK INC. All Right Reserved
163
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
fisheye_mounttype
<Not recommended
to use this>
ceiling, wall, floor
<product
dependent>
0/7 Indicate the supported type.
wall mount: 180° panoramic view
ceiling mount: 360° surround view without
blind spots
floor mount: 360° surround view without
blind spots
* Only available when "capability_fisheye" >
0
* It's recommended to use
"capability_videoin_c<0~(n-1)>_mounttype"
mounttype ceiling, wall,
floor,-
<product
dependent
* Available values
are listed in "
capability_videoin
_c<0~(n-1)>_mou
nttype "
0/7 Indicate the supported mount type.
"-": not support
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309c.
dintraperiod_support <boolean> 0/7 0: Non-support "Dynamic intra frame
period"
1: Support "Dynamic intra frame period"
"Dynamic intra frame period" can be used
to reduce bitrate by reducing the number of
I-frame.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0301c.