EasyManua.ls Logo

Vivotek IB9365-EHT-A - Page 313

Vivotek IB9365-EHT-A
426 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
User's Manual - 313
© 2019 VIVOTEK INC. All Right Reserved
176
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
panorama,
manual,
rbgain,
widerange,
outdoor,indoor,
sodiumauto,
-
<product
dependent>
"-" means white balance is not
supported.
iristype
piris,
dciris,
-
0/7
Indicate iris type.
"piris": P-Iris
"dciris": DC-Iris
"-": No Iris control support
* Note: For some cameras, this value
may be varied depending on mounted
lens.
sensortype
rawsensor,
smartsensor,
thermalsensor,
-
0/7
Indicate sensor type.
"rawsensor": Raw sensor
"smartsensor": Smart sensor
"thermalsensor": Thermal sensor
"-": N/A
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_mode
0,1
0/7
0: Non-support exposure control.
1: Support exposure control.
exposure_modetype
auto,
shutterpriority,
irispriority,
manual
<product
dependent>
0/7
Available mode of exposure setting.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_rangetype
onevalue,
twovalues
0/7
Support interface of exposure range.
"onevalue": The parameter is a
constant value.
© 2019 VIVOTEK INC. All Right Reserved
177
NAME VALUE SECURITY
(get/set)
DESCRIPTION
"twovalues": Need two parameters to
indicate the exposure range.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_shuttervalu
etype
fixed,
maximum,
-
0/7 * One to one mapping to the mode
type in "exposure_modetype".
"fixed": The shutter value is the
assigned value
(videoin_c<0~(n-1)>_shuttervalue).
"maximum": The shutter value can be
up to the assigned value
(videoin_c<0~(n-1)>_shuttervalue).
"-": not support.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1 and
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "onevalue".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
exposure_gainvaluety
pe
fixed,
maximum,
-
0/7 * One to one mapping to the mode
type in "exposure_modetype".
"fixed": The shutter value is the
assigned value
(videoin_c<0~(n-1)>_gainvalue).
"maximum": The shutter value can be
up to the assigned value
(videoin_c<0~(n-1)>_gainvalue)
"-": not support.
* Only available when
"capability_image_c<0~(n-1)>_

Other manuals for Vivotek IB9365-EHT-A

Related product manuals