Vivotek IB9365-EHT-A - Page 322

VIVOTEK
322 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
186
NAME VALUE SECURITY
(get/set)
DESCRIPTION
control.
"-": Not supported.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
exposure_windomain qvga, px, std, - 0/7 The domain to set an exposure
window.
"qvga": a 320x240 range to represent
the whole image.
"px": Locate a window in the image
with pixels.
"std": A normalized 0~9999 range.
"-": Not supported.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
exposure_winnum 0, <Positive
Integer>
0/7 Indicate the number of custom
exposure windows.
* If no "custom" is listed in
"exposure_winmode", this should be
0.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
exposure_ntsc_totalra
nge
A list of <Positive
Integer>
0/7 Available total range for NTSC analog
output.
* Only available when
"capability_image_c<0~(n-1)>_
exposure_mode" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0301a.
exposure_pal_totalra
nge
A list of <Positive
Integer>
0/7 Available total range for PAL analog
output.
* Only available when
"capability_image_c<0~(n-1)>_