Vivotek IB9365-EHT-A - Page 348

VIVOTEK
348 - User's Manual
© 2019 VIVOTEK INC. All Right Reserved
212
7.36 ePTZ Setting
Group: eptz_c<0~(n-1)> for n channel product. (capability_eptz > 0 or capability_fisheye = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
osdzoom
<Not recommended to
use this>
<boolean> 1/4 Indicates multiple of zoom in is
“on-screen display” or not.
* Reserved for compatibility, and suggest
don't use this since [httpversion] > 0302a
* We replace
"eptz_c<0~(n-1)>_osdzoom" with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth <boolean> 1/4 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 1/4 Tilt speed
* Only available when
"capability_fisheye" is 1
1/7 Tilt speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
panspeed -5 ~ 5 1/4 Pan speed
* Only available when
"capability_fisheye" is 1
1/7 Pan speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
zoomspeed -5 ~ 5 1/4 Zoom speed
* Only available when
"capability_fisheye" is 1
1/7 Zoom speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
autospeed 1 ~ 5 1/4 Auto pan/patrol speed
* Only available when
"capability_fisheye" is 1